How to Fix Laptop Speakers not working?

 Complete Guide to Troubleshoot Laptop Speakers not working

Laptop speakers not working can be really annoying as most people stream online and watch movies on laptops. Thus when the speakers stop working your laptop will have no sound. Occasionally even if the speakers are not working headphones do, but they do not offer the same level of satisfaction which speakers do. And you cannot hear via headphones when your friends are around, and you want to see something together. However, you do not have to bother since this is something which can be easily resolved.

Easy Resolutions for Laptop Speakers not working

Well, if your speakers are not working on laptop and you require them to work then here are some simple resolutions to help you.

1. Dislodge the Stuck Audio Sensor

The most common issue that leads to no sound on a laptop is the stuck audio sensor. This can be dislodged to make the speakers work successfully, but you need to be very cautious while dislodging the stuck audio sensor. Here is how to do it:

1). Push in the audio jack and then take it out very instantly.
2). Now push in an ear cotton bud and then twist it inside the audio jack cautiously and lightly.
3). Then insert a toothpick in the audio jack and now twist it around just like the cotton bud.
4). Be very calm when you insert the toothpick and move it in the audio jack as it can easily break the audio port if extra pressure is put on it.

2. Check Volume Mute Settings

Occasionally the trouble leading to laptop speakers not working is because of muted volume settings. To check if this is so, simply click on the volume tab in the taskbar and check if the volume is on mute or not. Simply un-mute it and set the required volume to get your laptop speakers to begin working again.

3. Run Windows Troubleshooter

Windows have built-in software for troubleshooting several problems, and it has a troubleshooter for speakers as well. Let’s take windows 10 as an example. In order to run a troubleshooter for laptop speakers you require to perform the following:

1). First go to start > settings > Update & Security.
2). There will be several options on the left side of your screen, choose Troubleshoot from there.
3). You will be provided several options for troubleshooting, click on Playing Audio and then click on Run the Troubleshooter on the box which opens.

4). A Windows wizard will open on your screen, follow the commands on it and you will be good to go.
This troubleshooter will fix the issue in most cases.

4. Uninstall and Install your Audio Drivers

Windows has several drivers for audio and speakers, and occasionally they get outdated and restrict the functioning of laptop speakers. A quick uninstall followed by installation is what you need to do to fix this issue. Here is what you should do for that:

1). Click the Windows logo key on keyboard and click R.
2). Enter devmgmt.msc and click Enter, this will open Device Manager.
3). Tap on ‘Sound, Video and Game Controllers’ and open it.
4). finally uninstall all the audio drivers one by one from the list.
5). Once you have uninstalled the entire drivers your laptop will automatically install new ones. If this does not happen then reboot your laptop and the drivers will be installed.

Thus, these are some simple methods of how to troubleshoot laptop speakers not working. In case if after following above steps, you are unable to fix it then no need to worry at all. Chat with experts available at our site so as to get quick resolution to fix it.

FAQs

Q) How to get sound back on my laptop?

A) Right-click the volume icon on your laptop screen, and choose “Adjust Audio Properties.” Tap “Advanced” from the Speaker Settings box at the bottom of the pop-up screen. Then select “Laptop” Click “Apply,” then close the box. Sound must now be restored.

Q) Why do my speakers suddenly stopped working?

A) Restart your computer. Confirm via the speaker icon in the taskbar that the audio is not muted and is turned up. Guarantee that the computer isn’t muted via hardware, for example a dedicated mute button on your laptop or keyboard. … For desktop systems with speakers plugged into the 3.5 mm jack, attempt a USB speaker or USB headphones.

You may also read: 

McAfee Update Failed

Lexmark Printer Not Printing

 Canon Pixma MX492 Wireless setup

How to Resolve Panda Antivirus Error Code 10?

 Complete Procedure to get rid of Panda Antivirus Error Code 10

Contents  hide 

1 What are the reasons of Panda Antivirus Unexpected Error Code 10?

1.1 Troubleshoot Panda Antivirus Error Code 10 [4 Simple Hacks]

1.2 Fix 1: Run Windows Defender

1.3 Fix 2: Run the service.msc Service

1.4 Fix 3: Run the System File Checker

1.5 Fix 4: Uninstall and Reinstall the Antivirus Program 

Panda antivirus is recognised for providing first-class security to the computers against any unnecessary threats. Now, if the security features fail to secure the system then it is a clear symbol that there is a software glitch.

Panda antivirus error code 10 is one of the common issues faced by numerous users. When this error arises, the antivirus programs/ functions get stuck and the computer fails to perform any command. Then, a message arises informing you about the error. 

If you are also receiving the similar error and tried searching for the solutions for this error, then you have reached the correct destination. Here you will get some common methods that can help you to resolve this error in minutes. Thus, let’s begin.

You may also read:  Webroot Error Code FZLC0056

What are the reasons of Panda Antivirus Unexpected Error Code 10? 

 There are numerous reasons behind the Panda error code 10. Let us have a fast look at the highlighted points mentioned below:

• Corrupted or partial download of the Panda antivirus program. 
• Corrupted or Damaged Windows registry files. 
• The system was infected by virus or malware earlier. 
• Antivirus connected files get deleted mistakenly.

. 

Now that you are aware of the probable reasons behind this error, hence, you simply require the possible hacks to eliminate this problem.

Troubleshoot Panda Antivirus Error Code 10 [4 Simple Hacks]

There are several methods to get rid of this error. You can follow the methods explained below: 

Fix 1: Run Windows Defender 

Windows Operating System has the in-built Windows Defender. It can help you to get rid of this issue. It can easily find the virus and malware-infected files. Thus, as soon as you remove those files you can use the Panda antivirus.

To run this, you can have a glance at the steps provided below: 

1. Initially and most important, bring up the Start menu. 
2. Enter “windows defender” in the search bar. 
3. Click the Enter key to open the Windows Defender. 
4. Go to the ‘Virus & threat Protection’ section. 
5. After that, click on the ‘Quick Scan’ button to begin the scanning process. 

Wait for a few seconds until the scanning procedure gets finished. After that, you can check if the issue is resolved. Else, you can proceed to the further ways described below. 

Fix 2: Run the service.msc Service

You can also fix the Panda antivirus error code 10 by running the ‘services.msc’. To do this, perform the steps mentioned below:

• In the starting, press the R and Win key simultaneously from the keyboard to invoke the Run Command box. 
• Now, enter “services.msc” in the Run box and click the Enter key from the keyboard to open this. (Else, click on the OK button to continue further). 
• Now, you have to guarantee that the status of Panda antivirus is ‘Running’. If it is not, then right-click on the service and select the ‘Automatic’ option from the list. 

After finishing the above steps, check if the error is resolved. Or else, you can go to the next solution stated below. 

Fix 3: Run the System File Checker 

SFC is an in-built virus scanning utility on Windows OS which can help you to troubleshoot this issue. It can also help you to fix the corrupted system files of the computer.

To run the System File Checker, follow the steps mentioned below: 

1. In the starting, go to the Start menu and enter “command prompt” in the search bar. 
2. Then, right-click on the ‘Command Prompt’ option showing in the search result. 
3. Afterward, enter “sfc/scannow” in the command line and click the Enter key from the keyboard to execute this command. 

Now, the System File Checker will begin to scan for the corrupted system files. If it finds any damaged system files, then it will fix that automatically. 

After running this, if you notice that the problem persists, then you can uninstall and reinstall the antivirus program to get rid of this issue. 

Fix 4: Uninstall and Reinstall the Antivirus Program

If all the above hacks fail to fix this problem, then uninstall and reinstall the Panda antivirus program to fix this error. To do this, follow the steps provided below: 

1. Initially, bring up the Start menu and open the Control Panel. 
2. Go to the ‘Programs and Features’ category. 
3. Find the Panda antivirus program by scrolling down the list of installed programs. 
4. Right-click on the Panda antivirus program and select the ‘Uninstall’ button. 
5. Verify the action by clicking the Enter button from the keyboard. 

Once you finish the uninstallation procedure, visit the official website of Panda antivirus and search for the latest version of Panda antivirus. Download and save that on your system.

 Afterward, install that by following the on-screen instructions. Now, you can check if the issue still persists. In case if you are unable to resolve it then simply consult experts at our toll-free. 

FAQs

Q) How to fix Panda Antivirus Error Code 10?

A) Follow above steps so as to fix this issue. In case of trouble, consult our experts for assistance.