Easiest Method To Fix Windows 10 Won’t Shut Down instantly

 With all the latest updates of Windows 10, Windows 10 Won’t Shut Down is a common problem for many users. Researches signify that abnormal Windows update, system files, and even fast startup are the major reasons behind it. You may don’t know how to resolve it. Fortunately, this blog provides8 solution to fix this annoying issue.

Easy Solutions To Resolve Windows 10 Won’t Shut Down

Disable the Fast Startup

For many users disabling the startup feature method generally resolves Windows 10 won’t shut down problems quickly. Here is what you require to do:

• Click the Windows logo + I buttons to open Settings
• Tap on System and then click to open Power and Sleep
• Scroll down and tap on ‘Additional power settings’. Tap on ‘Choose what the power buttons do’ on the left side
• Tap on ‘Change settings that are presently available’ this will allow you to change the settings of the shutdown
• Uncheck the box of ‘Turn on fast startup (recommended)’ and choose ‘Save changes’.

Once the fast startup feature is disabled, it will let your window 10 to shut down fully.

Force Shutdown the System

You can also attempt to force shutdown your Windows 10 computer. It generally helps in resolving this issue:

• Click and hold the Power button till the computer turns off (wait for the small Led light also to turn off before removing your finger from the power button)
• Unplug entire power sources of the computer and leave it for 30 minutes and again start your system
• After the computer starts, try to shut it down to check if the issue is resolved.

This will function only if the fast startup feature is not activated.

Try a complete Shutdown

If you are using the fast startup feature, then it doesn’t turn off the computer suitably due to the lessened boot time. What it actually does is that it hibernates kernel session in this way, manipulating the boot time. In order to resolve this issue, you should perform a complete shut shutdown. You can do this via two solutions:

Solution  I: Using the Command Prompt

• In the Search, tab enter ‘cmd’
• Then right-click on the Command Prompt and choose ‘Run as Administrator’
• Now, enter the command shutdown /s /f /t 0
• This will start a full shut down.

Solution 2: Using the Shift Key

When you click on Shut Down in the Start menu, then click Shift key with it and this will turn off your laptop fully.

Boot System from Safe Mode and then Cancel Automatically Restart

Another method to resolve the Windows 10 computer won’t shut down the issue is to disable automatic restart.

• Click F8 constantly till the Windows logo comes up on the screen
• When you release the F8 key the boot menu will appear and you should select ‘Safe Mode’
• Boot the system in Safe Mode and then continue to search once the Windows completes booting
• Subsequently enter ‘sysdm.cpl’ without the commas to open sysdm.cpl
• Then below Startup and Recovery click on Advanced > Settings
• Now, uncheck the ‘Automatically restart’ box
• Tap on ‘OK’ and then restart the system.

Now try shutting down the system to check if the problem is resolved.

Repair Windows System Files

If Windows system files are corrupted then your system will cause troubles in shutting down normally. Here is how you can fix it:

• Click the Windows logo key + R key simultaneously to open the Run Command. Now input “cmd” and click OK to run as the administrator
• Enter the command sfc /scannow and then click Enter.

Wait for the verification process to finish. When this is done, you can restart the computer to check if Windows 10 won’t shut down the problem still persists.

Use the Command Prompt to Shut Down System

Command Prompt can help you perform several actions comprising one to shut down the system completely. Here is what you require to do:

• Click the Windows logo key + R key together to open the Run Command. Input “cmd” and click OK to run as the administrator.
• Enter the command shutdown /p and then click Enter.

This will shut down your system without any trouble.

Stop Windows Delivery Update Optimization

Our system is often downloading updates and if there is are many systems on a similar network, systems tend to exchange the updated files rather than downloading on each system. Therefore, if a system on the network same as you are on is getting an update from you, then your system will not shutdown. However, this feature can easily be turned off and your Windows 10 system can shut down fully. Here is what you require to do:

• Click the Windows logo +I buttons to open Settings
• Subsequently, click on Update and Security
• Tap on Delivery Optimization to proceed
• You require to toggle the ‘Allow downloads from other PCs’ button off

This will forbid the other systems to get their updates from your Windows 10 system and let your system to shut down in a normal way. By following the above solutions, you would be able to fix Windows 10 computers that won’t shut down issues. If in case if you experience any issue or unable to fix it then simply consult professionals. Consult professionals available at Pcsolutione so as to get complete guidance to fix error code easily.

How to Troubleshoot Brother Printer Drum Error?

 There is no devise in the world that doesn’t reach the end of its life-cycle. At some time or the other, a devise may stop working and begin displaying error messages. This is also the case with Brother Printer. At a certain point in time, your Brother machine might show “Brother Printer drum error” or “Brother Printer drum end soon”. Go through the blog till end so as to easily troubleshoot Brother Printer Drum Error.

Solutions to Troubleshoot Brother Printer Drum Error

Reset Brother Printer drum

To resolve the Brother Printer drum error message, initially, you can try to reset Brother Printer drum and then try other solutions.

1. Initially, open the front cover of your Brother machine.
2. Subsequently, press the “OK” button and hold it for two seconds until the drum unit displays.
3. When it does, click the “OK” button.
4. Now, click the “arrow” and it will show the “Reset” option.
5. Subsequently, reset the drum counter of your printer and close the front cover.

Clean Brother Printer drum

To clean the Brother Printer drum, you require to clean the corona wire on the drum unit. For this follow below steps:

1. Turn off the machine and remove the entire cables connected to it.
2. Then, open the front cover and take out the drum unit and cartridge assembly slowly.
3. Slide the green tab to and fro various times and clean it calmly.
4. After this, set the drum unit and the toner cartridge assembly in the printing machine.
5. Close the front cover and reconnect the entire cables.

Examine if the issue has resolved. If not, then proceed to the next solution.

Replace drum on Brother Printer

Brother Printer drum error also arises when the drum unit has reached the end of its life.

1. Open the front cover of your printer and take out its drum unit as well toner cartridge assembly.
2. After that, take out the toner cartridge out of the drum unit by pushing the green lock lever.
3. Then take the new drum unit out of its new packaging.
4. Then, put the cartridge in the new drum unit and the green lock lever will lift automatically.
5. It is time to change the new drum unit and the toner cartridge back in the machine.
6. After that, press “Clear” or “Back” and then press the triangular icon. This will authenticate that you are installing a new drum.
7. If you have done the replacing task effectively, the LCD will show the “Accepted” message.
8. Finally, shut the front cover and begin using your Brother printer once again.

Hopefully, after performing above solutions you would have resolved Brother Printer Drum Error. In case, if you experience any trouble while performing it, then simply consult professionals. Call Brother Printer Customer Support professionals available at Pcsolutione so as to get best assistance regarding same.

How To Troubleshoot Brother Printer Not Printing?

 Printing from PC is the most common process particularly in an office. Thus, when the printing machine suddenly rejects to print, a flow of delays and operation issues arise.  Here are some effective solutions, to Troubleshoot Brother Printer Not Printing issue. In addition, you can take complete guidance from Brother Printer Help team.

There are several reasons why a brother printer doesn’t print. It contains insufficient toner levels, paper jamming, worn outs, or interior jams or outdated printer drivers.

Effective Methods to Troubleshoot Brother Printer Not Printing

Guarantee the printer’s power source-

When the printing machine has sufficient power, LED lights are lit.

A stable LED light on the power option displays that the printing machine is on.

Once the error lights begin burning or blinking, it shows that printer error. Examine the icon/option that signals error. It might be a paper or toner error.

If no lights are on regardless of being connected, examine your power exit or reconnect the power cable. Mostly printer problems have resolved simply by disconnecting and reconnecting the power cable.

Check the connection between brother printer and System–

Confirm if the connection between PC and printer is safe. Reconnect if essential.

Examine if PC has connected to the printing machine. You need to open the entire devices and click on the brother printer model.

Authenticate status, if it has established as a default printer. If not, you require to add the printing device and set it as your main printing device.

Examine the access point and router shared by printer and PC. Confirm that the Ethernet cable and manage access point settings suitably.

Check if the printing device status has stopped, Brother Printer Offline or not set as default.

Make sure if the printer driver is updated-

Outdated printer driver can cause lots of printer problems.

You require to update the printer just by downloading the latest version from

 a.) Using downloaded utility driver

 b.) Visiting brother printer website.

Do a Cold Reset-

If everything is well but your Brother Printer not printing from PC, you require to perform a cold reset. A cold reset or network factory default setting removes the recent settings and the entire archives. Thus, it is the best to set a backup before applying this solution. Whenever you face technical glitches with your brother printer, all these are the effective solutions you can try before calling a certified technician or Brother Printer Support team at Pcsolutione. Before facing another issues, you require to connect with online printer technicians to get instant solutions.